Bathroom Installation in Harare
New bathroom for your build? Renovating an old one? Adding an en-suite or cottage bathroom? We install bathrooms across Harare from the pipes up. Honest quotes, clear timelines, no half-finished jobs.
Full bathrooms, rough-ins, en-suites & fittings swaps
Most bathrooms done in 7–14 days
12-month workmanship guarantee on installs
Bathroom Installation Services
We are plumbers first. That means your bathroom is built around solid, leak-free plumbing, not the other way around. Here is what we offer:
Full Bathroom Installation
We design, plumb, fit, and finish. From bare wall to finished bathroom. We coordinate tilers, electricians, and painters where needed.
Bathroom Plumbing Rough-In (New Builds)
For new houses still under construction. We install all hot and cold water pipes, drain lines, vent stacks, and outlets to your architect’s drawings.
Bathroom Renovation
Gutting an old bathroom and starting fresh. Full strip-out, new layout if needed, full re-fit.
Adding a New Bathroom
En-suite to an existing bedroom, granny flat or cottage bathroom, or guest bathroom addition.
Fittings-Only Installation
Keeping your layout but replacing the toilet, basin, bath, shower, or mixers. Same-day or next-day work in most cases.
Types of Bathroom Projects We Install
New Build Bathroom Plumbing
For homes under construction. We work from your architect’s drawings, install all rough-in plumbing, then come back at second-fix to install fittings.
Typical scope:
Hot and cold supply lines, drainage, vent stacks, geyser plumbing, fitting installation.
Typical time:
3–5 days for rough-in. 4–6 days for second-fix.
Full Bathroom Renovation
Stripping an old bathroom and starting fresh. Often used when the plumbing is failing, or the layout needs to change.
Typical scope:
Strip-out, layout changes, new pipes if needed, new fittings, tile coordination, painting coordination.
Typical time:
10–14 days depending on size and finishes.
En-Suite or Cottage Bathroom Addition
Adding a new bathroom where there wasn’t one before. Usually involves cutting new drainage, running water lines, and connecting to your existing sewer or septic.
Typical scope:
New rough-in, drainage connection, geyser supply, full fittings.
Typical time:
7–14 days.
Fittings Swap (Layout Stays the Same)
You keep the existing pipes and tiles. We replace the toilet, basin, bath, shower mixer, or all of the above.
Typical scope:
Remove old fittings, replace with new ones, test for leaks.
Typical time:
Half a day to 2 days.
Multiple Bathrooms or Complex Builds
For homes with 3+ bathrooms, body corporates, or commercial buildings (offices, lodges, guest houses).
Typical scope:
Phased work to keep one bathroom always working. Detailed quote per phase.
Typical time:
Quoted on-site.
Why Pipes Burst in Harare
Pipes burst here for reasons that don’t apply in other cities. Here is what we see most.
Old Galvanised Steel Pipes
Many Harare homes built before 1985 still have original galvanised steel pipes. After 40+ years, the inside rusts, narrows, and weakens. One day it splits. If your house is from the 60s, 70s, or 80s and you haven’t repiped, this is your most likely cause. Common in: Avondale, Highlands, Mount Pleasant, Greendale, Newlands, Belvedere, parts of Borrowdale.
Ground Movement (Black Cotton Soil)
A lot of Harare sits on black cotton soil. It swells when wet and shrinks when dry. This pulls pipes apart at the joints. We see this most in late winter and early summer.
Council Pressure Surges
ZINWA and Harare City pressure goes from zero to high quickly when water comes back after a cut. The sudden surge pops weak joints and old pipes.
Borehole Pressure Issues
If your borehole pump has no pressure switch or the switch is faulty, pressure can spike high and damage pipes. We see this often in suburbs heavily reliant on boreholes.
Tree Roots
Jacaranda, msasa, and gum tree roots seek out water lines and crush them. Old clay or concrete pipes are the worst affected. PVC and HDPE are stronger but not immune.
Cold Snaps and Temperature Swings
Harare’s June and July nights can be 5°C and the days 25°C. That swing stresses metal pipes and rigid fittings. Cracks form, then burst.
Cheap Fittings From Past Repairs
Some leaks are from past plumbing work using low-grade fittings. We see this often. Quality fittings cost slightly more upfront and last decades longer.
Bathroom Fittings & Brands We Install
You can buy your own fittings or have us supply. Either way, here is what we install.
Toilets
- Vitra (Turkey — popular in Harare for value)
- Geberit (Switzerland — premium, including in-wall cisterns)
- Cobra (South Africa — reliable mid-range)
- Local Zimbabwean brands (budget builds)
Baths & Showers
- Acrylic baths (entry-level)
- Reinforced fibreglass (most common)
- Cast iron or stone (luxury freestanding)
- Frameless and framed shower screens
- Walk-in showers and wet rooms
Mixers & Taps
- Hansgrohe (Germany)
- Grohe (Germany)
- Cobra (South Africa)
- Vitra
- Local Zimbabwean brands
Vanities, Mirrors, Accessories
- Wall-hung and free-standing vanities
- LED mirrors, demister mirrors
- Heated towel rails
- Toilet roll holders, towel bars, robe hooks
Hot Water Integration
- Electric geysers (Kwikot, Saffire, Techron)
- Solar geysers (Solahart, Megasun, Xstream)
- Gas geysers (Bosch, Rinnai)
Water Supply Integration
- JoJo tank tie-ins for council water cuts
- Borehole and pressure pump integration
- Pressure-reducing valves
Our Bathroom Installation Process and Timeline
01
Free Site Visit
We come to you, look at the space, listen to what you want, and ask the right questions. No charge, no obligation.
02
Written Quote
You get a detailed quote with line items: fittings, labour, materials, and timeline. Nothing hidden.
03
Sign-Off and Deposit
You take time to think. When ready, you sign and pay a 50% deposit. We order fittings and book the crew.
04
Strip-Out
For renovations, we remove old fittings, lift tiles, and disconnect existing plumbing. We protect the rest of your house from dust.
05
Plumbing Rough-In
We run new water and drain lines, fit vent stacks, and prepare for the geyser. Everything pressure-tested before walls close up.
06
Tiles, Paint, Electrics
Our partner trades come in. We coordinate so each one starts on schedule and finishes clean.
07
Fittings Install
Toilet, basin, bath, shower, mixers, accessories. Everything connected and tested.
08
Final Check and Handover
We do a walk-through with you, check every leak point, confirm hot water flow, and clean up. You sign off. Final 50% is due.
Why Choose Master Plumbers Harare for Your Bathroom
Plumbing-First Thinking
The most expensive bathroom problems are plumbing problems hidden under tiles. We get the pipes right first. Tile gets laid on a system that won’t fail.
Detailed Written Quotes
You get line items, not lump sums. You can see exactly where the money goes. No “extras” added later.
We Show Up When We Say
Bathroom projects fail when trades don’t arrive. We schedule realistically and stick to it. If we are late, we tell you why before you have to ask.
Buy Your Own Fittings or Let Us Supply
Some clients want to choose every tap themselves. Others want us to handle it all. Either works.
We Coordinate the Other Trades
Tilers, electricians, painters we work with people we trust. You don’t have to find them, brief them, or manage them.
Pay How You Want
50% deposit, 50% on completion. USD cash, EcoCash, Innbucks, ZIPIT, or bank transfer.
12-Month Workmanship Guarantee
We give a full year on all our installation work. In writing. If something fails, we come back free.
Suburbs We Cover for Bathroom Installation
We install bathrooms across all of Harare and the surrounding towns.
- Borrowdale
- Borrowdale Brook
- Mount Pleasant
- Highlands
- Chisipite
- Glen Lorne
- Vainona
- Helensvale
- Greendale
- Newlands
- Eastlea
- Hatfield
- Avondale
- Belvedere
- Mabelreign
- Marlborough
- Emerald Hill
- Westgate
- Waterfalls
- Chitungwiza
- Ruwa
- Norton
Bathroom Installation FAQ
How long does a bathroom installation take?
A full bathroom renovation takes 10 to 14 days for a standard family bathroom. A simple fittings swap can be done in a day. A premium master en-suite with imported fittings can take 14 to 21 days. We give you an exact timeline in the quote.
Do I need to be home during the work?
You don’t need to be home every day. We need access in the morning and afternoon, but the crew works on its own once started. For families, we recommend keeping one bathroom working at all times by staging the work.
Can I buy my own fittings?
Yes. Many clients prefer to buy from Bathline Zimbabwe, Halsteds, Builders Express, or directly from a supplier. We give you a spec list of what to buy. We can also supply everything ourselves at trade pricing.
What if I don’t know what I want yet?
Start with a free site visit. We will look at the space, talk through your needs, and suggest options. We can recommend a designer if you want a 3D layout before deciding.
Do you handle tiling and electrical?
We coordinate trusted tilers and electricians as part of the project. The tiling, painting, and electrical work is billed separately on the quote so you can see exactly what each trade costs. You can also use your own people if you prefer.
Will my old galvanised pipes be a problem?
Often yes. If your house is from before 1985, the existing pipes may be at the end of their life. We always pressure-test the existing system. If we recommend repiping the bathroom section, we tell you why and quote it transparently.
Can you connect a new bathroom to my septic tank or borehole?
Yes. We connect new bathrooms to council sewer, septic tanks, or French drains depending on your property. We also tie new bathrooms into JoJo tanks, boreholes, and pressure pumps for full backup during water cuts.
Ready to Start Your Bathroom?
Whether you’re building new, renovating, or just replacing a tired toilet, the first step is the same: a free site visit and an honest quote.
No pressure. No hard sell. Just a clear price and a clear timeline.
Chat with us